all 4 one four areas of rig inspection

BSEE APPROVED WELL CONTROL COMPLIANCE VERIFICATION

In accordance with the requirements of the Code of Federal Regulations Subpart G, ADC and Blade Energy Partners have engaged in a strategic partnership that will provide the on-site independent 3rd party (ITP) verification requirements and P.E certification of system compliance requirements detailed within CFR §250.732.

In compliance with CFR §250.731, ADC will, as an ITP, verify the design, status and suitability of the BOP & Well Control Equipment and provide verification data to Blade Energy Partners to allow the theoretical calculation and physical verification that:

  • Test data demonstrates the Shear Rams capability to shear the drill pipe at the water depth as required in CFR §250.732;
  • The BOP is designed, tested and maintained to perform under the maximum environmental and operational conditions anticipated to occur;
  • The accumulator system has sufficient fluid to operate the BOP system without assistance from the charging system;
  • A subsea BOP in an HPHT environment, as defined in CFR §250.804 (b), has not been compromised or damaged from previous service.
  • A surface BOP on a floating facility, has not been compromised or damaged from previous service.

Click Here to visit Blade Energy Partners

ADC will witness the shear testing using the same type of BOP equipment or shear valves being used on the rig and sample pipes provided by the operator. ADC will subsequently gather the shear test information and data to ensure that the information gathered is available and allows for the calculation of the Shear Ram Verification parameters in accordance with the regulations.

Blade Energy Partners’ licensed Professional Engineers will perform the theoretical shear calculations using the information provided by ADC and issue a P.E stamped Shear Certificate.

ADC will verify the information relating to the installation, operating conditions, operational environmental conditions and BOP information to the Shear Ram Verification and Accumulator Sizing Verification.

Blade Energy Partners’ licensed Professional Engineers will review the information provided by ADC, perform the accumulator volume and theoretical shear test calculations, in order to provide a P.E stamped Well Compatibility Certificate.
In addition, the information provided will comply with the requirements of:
  • API Spec 16 A, 4th Edition, 2017,
  • API Spec 16 D, 3rd Edition, 2018,
  • API S 53, 5th Edition, 2018,
  • API Technical Report 16TR1, 1st Edition, Errata 1, 2018

CLIENTS:

AGR

APACHE CORPORATION

BUREAU VERITAS

BP

CAIRN ENERGY

CHEVRON

CLYDE & CO

CNR INTERNATIONAL

CONOCOPHILLIPS

DANA PETROLEUM

DNV GL

ECOPETROL

ENQUEST

EQT

EXCEED

GAZPROM

GLENCORE

HESS

HURRICANE

INCE & CO

INEOS GROUP

JX NIPPON

MURPHY OIL

NEXEN

PETROFAC

PREMIER OIL

REPSOL

SEADRILL

TOTAL

TRANSOCEAN

TULLOW OIL

TURKISH PETROLEUM

WINTERSHALL

target 2 BOP & well control

FOR MORE INFORMATION ABOUT ADC SPECIALISED RIG INSPECTION SERVICES EMAIL US BY USING THE CONTACT BUTTON BELOW OR PHONE +44(0) 1224 209123

INTERNATIONAL HEAD QUARTERS UK:

INTERNATIONAL OFFICES & AGENTS AROUND THE WORLD:

ADC UK

32-34 QUEENS ROAD, ABERDEEN,

SCOTLAND AB15 4YF

t: +44 (0) 1224 209123

e:

 

ADC RIG INSPECTION
AMERICAS CORP

THE CANNON,

1334 BRITTMOORE RD,

HOUSTON, TEXAS 77043

t: +1-713-814-4849

t: +1-303-912-2474

e:

 

ADC ASIA PACIFIC

SUITE 26.1, LEVEL 26,

MENARA IMC, 8 JALAN SULTAN

ISMAIL 50250

KUALA LUMPUR, MALAYSIA

t: +603 2072 4604

e:

 

ADC SAUDI ARABIA

IN COLLABORATION WITH GOTECH

P.O.BOX: 402 AL-KHOBAR 31952

t: +966 3 8533443

e:

 

ADC UAE

IN COLLABORATION WITH

AL MASAOOD OIL & GAS

606 HAMDAN STREET,

AL MASAOOD TOWER, 17TH FLOOR (P)

P.O. BOX 4352, ABU DHABI, UAE

t: +971 2 8155990

e:

 

 

 

DNV GL ISO 9001 certified
30 years of engineered performance
Oil and Gas UK

ADC INDONESIA

IN COLLABORATION WITH

PT TIGA OMBAK

JI. PEJATEN BARAT II NO. 20

UNIT D, JAKARTA 12510

t: +62 2172787872

t: +60 126541157

e:

 

ADC VIETNAM

MANAGED THROUGH KL OFFICE

t: +603 2070 0255

t: +60 126541157

e:

 

ADC LIBYA

IN COLLABORATION WITH

MOUNTAIN FALCON FOR

OIL & GAS SERVICES (MFOGS)

P.O. BOX 12044,

WALI AHAD STREET,

AIRPORT ROAD,

TRIPOLI, LIBYA

t: +62 2172787872

t: +60 126541157

e:

 

 

 

CAREERS | PRIVACY POLICY | TERMS OF USE | SERVICES TERMS & CONDITIONS

© ABERDEEN DRILLING CONSULTANTS LTD 2019 ALL RIGHTS RESERVED

SPECIALIST RIG INSPECTION

ADC Logo

ENGINEERED PERFORMANCE WORLDWIDE

HOME

ABOUT

ALL4ONE

REPORTING

TRAINING

NEWS

CAREERS

CONTACT