WE ARE CURRENTLY

RECRUITING...

Aberdeen Drilling Consultants are recruiting the following:

Principal Mechanical Specialist – Land Rigs (Onshore USA)

Principal Electrical Specialist - Land Rigs (Onshore USA)

Principal Specialist – Mechanical (Post Generation 5 Semi-Submersible/Drillship)

Principal Specialist – BOP and Well Control (Conventional and MUX Control)



Principal Mechanical Specialist – Land Rigs (Onshore USA)

The Principal Mechanical Specialist is responsible through ADC, to conduct land drilling rig and mechanical equipment condition audits in accordance with ISO 19011 Guidelines for Management System Audits. This role is principally based in the USA but may necessitate travel worldwide.

In the act of doing this the Principal Mechanical Specialist is to provide the Client with a valid assessment and report on the availability, reliability and fitness-for-purpose of all mechanical equipment and systems relating to the control of rig power, drilling, hoisting and safety critical equipment including surface Blowout Preventer.

Furthermore, they may be required to provide specialist advice, operational support or training material to clients upon request. Particular interest will be extended to candidates who beyond their strong foundation in mechanical equipment and systems can demonstrate experience and training in regards to automated equipment control.

It is expected that the Principal Mechanical Specialist is familiar with applicable and relevant standards and specifications in regards to compliance with API, ISO, NFPA, OSHA, IADC, OEM and state specific requirements.

The Principal Specialist should have excellent verbal and written communication skills and fully computer literate; examples of technical reports previously prepared by any candidates will be requested as part of the selection process.

Those with a qualification in regards to Lead Auditor are preferred.

Applications should be sent to careers@adc-engineering.com



Principal Electrical Specialist - Land Rigs (Onshore USA)

The Principal Electrical Specialist is responsible through ADC, to conduct land drilling rig and electrical equipment condition audits in accordance with ISO 19011 Guidelines for Management System Audits. This role is based in the USA and will require nationwide and to some extent worldwide travel.

In the act of doing this the Principal Electrical Specialist is to provide the Client with a valid assessment and report on the availability, reliability and fitness-for-purpose of all electrical equipment including power generation, distribution and control. Furthermore, the suitability of equipment in hazardous areas as well as critical safety systems i.e. gas detectors will also be assessed.

Furthermore, they may be required to provide specialist advice, operational support or training material to clients upon request. Particular interest will be extended to candidates who beyond their strong foundation in electrical equipment and systems can demonstrate experience and training in regards to automated equipment control.

It is expected that the Principal Electrical Specialist is familiar with applicable and relevant standards and specifications in regards to compliance with API, NFPA, OSHA, IADC, OEM and state specific requirements. Candidates are expected to be competent in Explosion Proof Equipment (CompEx) and be trained in HV/LV Switchgear.

The Principal Specialist should have excellent verbal and written communication skills and fully computer literate; examples of technical reports previously prepared by any candidates will be requested as part of the selection process.

Those with a qualification in regards to Lead Auditor are preferred.

Applications should be sent to careers@adc-engineering.com



Principal Specialist – Mechanical (Post Generation 5 Semi-Submersible/Drillship)

The Principal Specialist Mechanical is responsible through ADC, to conduct drilling rig equipment condition audits in accordance with ISO 19011 Guidelines for Management System Audits. In the act of doing this the Principal Specialist Mechanical is to provide the Client with a valid assessment and report on the availability, reliability and fit-for-purpose of all mechanical equipment and systems relating to the control of rig power, drilling, hoisting, marine and safety critical (excluding BOP) equipment. Furthermore, they may be required to provide specialist advice, operational support or training material to clients upon request. Particular interest will be extended to candidates who beyond their strong foundation in mechanical equipment and systems can demonstrate experience and training in regards to automated equipment control.

It is expected that the Principal Specialist is familiar with applicable and relevant standards and specifications in regards to compliance with API, IMO, ISO and OEM requirements; although the position would require worldwide travel it would be desirable if particular experience to the regulatory requirements of offshore drilling operations within the UKCS are understood.

The Principal Specialist should have excellent verbal and written communication skills and fully computer literate; examples of technical reports previously prepared by any candidates will be requested as part of the selection process.

Those with a qualification in regards to Lead Auditor are preferred.

Applications should be sent to careers@adc-engineering.com



Principal Specialist – BOP and Well Control (Conventional and MUX Control)

The Principal Specialist BOP and Well Control is responsible through ADC, to conduct equipment condition audits of subsea and surface BOP and associated control equipment in accordance with ISO 19011 Guidelines for Management System Audits. These equipment condition audits are conducted during shipyard periods, between wells or between Operator and will require the Principal Specialist to have a strong understanding of associated planning, maintenance and testing routines conducted during these periods. In the act of doing this the Principal Specialist BOP is to provide the Client with a valid assessment and report on the availability, reliability and fit-for-purpose of all BOP and controls equipment and systems. Furthermore, they may be required to provide specialist advice, operational support or training material to clients upon request. Particular interest will be extended to candidates who beyond their strong foundation in the BOP hardware can demonstrate experience and training in regards to automated equipment control.

It is expected that the Principal Specialist is familiar with applicable and relevant standards and specifications in regards to compliance with API Std 53, 16AR, Spec 6A, 16A, 16C, 16D, 20E and 20F; although the position would require worldwide travel it would be desirable if particular experience to the regulatory requirements of offshore drilling operations within the UKCS are understood.

The Principal Specialist should have excellent verbal and written communication skills and fully computer literate; examples of technical reports previously prepared by any candidates will be requested as part of the selection process.

A current IWCF level 2 (or equivalent) certificate will be required with a qualification in regards to Lead Auditor preferred.

Applications should be sent to careers@adc-engineering.com

CAREERS WITH ADC

FOR MORE INFORMATION ABOUT ADC SPECIALISED RIG INSPECTION SERVICES EMAIL US BY USING THE CONTACT BUTTON BELOW OR PHONE +44(0) 1224 209123

INTERNATIONAL HEAD QUARTERS UK:

INTERNATIONAL OFFICES & AGENTS AROUND THE WORLD:

ADC UK

32-34 QUEENS ROAD, ABERDEEN,

SCOTLAND AB15 4YF

t: +44 (0) 1224 209123

e: info@adc-engineering.com

 

ADC RIG INSPECTION
AMERICAS CORP

10375 RICHMOND AVENUE,

SUITE 1300, HOUSTON,

TEXAS 77042

t: +1-281-433-9551

e: Wknur@adc-engineering.com

 

ADC ASIA PACIFIC

SUITE 26.1, LEVEL 26,

MENARA IMC, 8 JALAN SULTAN

ISMAIL 50250

KUALA LUMPUR, MALAYSIA

t: +603 2072 4604

e: Cduncan@adc-engineering.com

 

ADC SAUDI ARABIA

IN COLLABORATION WITH GOTECH

P.O.BOX: 402 AL-KHOBAR 31952

t: +966 3 8533443

e: Jmcgill@adc-engineering.com

 

ADC UAE

IN COLLABORATION WITH

AL MASAOOD OIL & GAS

606 HAMDAN STREET,

AL MASAOOD TOWER, 17TH FLOOR (P)

P.O. BOX 4352, ABU DHABI, UAE

t: +971 2 8155990

e: JMcgill@adc-engineering.com

 

 

 

IMCA member
DNV GL ISO 9001 certified
30 years of engineered performance
Oil and Gas UK

ADC INDONESIA

IN COLLABORATION WITH

PT TIGA OMBAK

JI. PEJATEN BARAT II NO. 20

UNIT D, JAKARTA 12510

t: +62 2172787872

t: +60 126541157

e: Cduncan@adc-engineering.com

 

ADC VIETNAM

MANAGED THROUGH KL OFFICE

t: +603 2070 0255

t: +60 126541157

e: Cduncan@adc-engineering.com

 

ADC LIBYA

IN COLLABORATION WITH

MOUNTAIN FALCON FOR

OIL & GAS SERVICES (MFOGS)

P.O. BOX 12044,

WALI AHAD STREET,

AIRPORT ROAD,

TRIPOLI, LIBYA

t: +62 2172787872

t: +60 126541157

e: JMcgill@adc-engineering.com

 

 

 

CAREERS | PRIVACY POLICY | TERMS OF USE | SERVICES TERMS & CONDITIONS

© ABERDEEN DRILLING CONSULTANTS LTD 2018 ALL RIGHTS RESERVED

SPECIALIST RIG INSPECTION

ADC Logo

ENGINEERED PERFORMANCE WORLDWIDE

HOME

ABOUT

ALL4ONE

REPORTING

TRAINING

NEWS

CAREERS

CONTACT