OFFSHORE & ONSHORE RIG INSPECTIONS

Our inspections aim to contribute to getting the drilling rig prepared for drilling operations; we understand that to do that we must fit in with the onshore and offshore teams and provide direct and prompt feedback to enable early repair and rectification of any non-conformances identified.

 

ADC RIG INSPECTIONS COVER

ALL ASPECTS OF A RIGS LIFE

OPERATIONAL ASSURANCE & WITNESS ACCEPTANCE TESTING:

Whether the rig is new construction or undergone overhaul our operational assurance and witness acceptance testing aims to assure that the drilling rig and its equipment is proven

‘fit for purpose’.

 

ADC operational assurance and witness acceptance testing usually culminates in the conductance of the systems integration test (SIT) of the rigs equipment and systems. However, ADC can be fully involved much earlier at the construction phase of the rig equipment, providing services ranging from monitor and expedition on build and delivery through to witnessing FAT (Factory Acceptance Testing) of the individual equipment

components. This involvement at the construction phase results in the development of familiarity and understanding on the functional design and operable capacities of the equipment – this knowledge can then be applied during operational assurance and witness

of acceptance testing of the full rig.

 

PRE-CHARTER:

The aim of the pre-charter inspection is to provide a comprehensive assessment of the rig operability status, equipment condition and compliance to Operator requirements. This is achieved by a combination of focused inspections conducted on past rig operational and safety performance, rig-based systems (HSE management, maintenance and certification) and physical inspection of rig equipment.

 

IN SERVICE:

Working proactively with the contractor, inspections monitor and measure

in-service performance against agreed client criteria, with analysis of all safety critical elements (SCE’s) adhering to the FARSI performance model of: Functionality, Availability, Reliability, Serviceability and Interdependency.

 

We pride ourselves on our extensive engineering knowledge of over 30 years, and our ability to deliver a 60+ strong team of engineering professionals available on a call out basis anywhere in the world. Working alongside your own rig management team, we will define and

tailor the precise scope of service that fits your specific needs.

 

That's why we provide our rig inspection services on a modular basis. That way we can agree the exact requirement with you and match the precise resources you require to meet your needs.

 

 

CLIENTS:

ABS

AGR

APACHE CORPORATION

AWILCO DRILLING

BEDROCK DRILLING

BG GROUP

BP

BUREAU VERITAS

CAIRN ENERGY

CENTRICA ENERGY

CHEVRON

CLYDE & CO

CNR INTERNATIONAL

CNOOC

CONOCOPHILLIPS

DANA PETROLEUM

DEA GROUP

DNV.GL

DONG ENERGY

DUBAI PETROLEUM

ENI

ENQUEST

ENSCO PLC

GAZ DE FRANCE

GAZPROM

GLENCORE

HESS

INCE & CO

INPEX

JX NIPPON

KUWAIT OIL COMPANY

LR SENERGY

MAERSK OIL & GAS

MAERSK DRILLING

NEXEN

OCEAN RIG

OPHIR ENERGY

PERENCO

PETRONAS CARIGALI

PREMIER OIL

REPSOL

ROWAN DRILLLING

RWE GROUP

SASOL

SAUDI ARAMCO

SEADRILL

SEMBCORP

SHELF DRILLING

SPD

SUNCOR

TAQA

TOTAL

TRANSOCEAN

TULLOW OIL

OFFSHORE & ONSHORE

RIG INSPECTIONS

After thirty years inspecting rigs worldwide you can imagine we’ve gained quite a reputation; the words consistently used by our clients to underpin this reputation are professionalism, experience, attention to detail, integration, contribution and quality of reporting.

 

We are proud of our independent status and approach to audit and inspection, which helps us work as part of a team with Operators and Drilling Contractors alike. In practice, we apply sound engineering judgement and common sense when assessing the potential risks and the resultant actions required, while at all times adhering to industry and legislative standards.

 

Our inspection experience not only spans the full gamut of operating rigs, from compound (mechanical) drive land drilling rigs to Generation 6 Class 3 dynamically positioned drill ships, but also enables us to deliver inspections of the highest standard, by firstly insisting on understanding our clients operational requirements and then applying five basic but pretty powerful questions, which form the foundation of every rig audit we undertake:

FUNCTIONALITY

AVAILABILITY

RELIABILITY

SERVICEABILITY

INTERDEPENDENCY

FOR MORE INFORMATION ABOUT ADC INTEGRATED RIG INSPECTIONS EMAIL US BY USING THE CONTACT BUTTON BELOW OR PHONE +44(0) 1224 209123

INTERNATIONAL HEAD QUARTERS UK:

 

ADC UK

32-34 QUEENS ROAD, ABERDEEN, SCOTLAND AB15 4YF

t: +44 (0) 1224 209123

e: info@adc-engineering.com

 

INTERNATIONAL OFFICES & AGENTS IN:

 

ADC ASIA PACIFIC

SUITE 26.1, LEVEL 26, MENARA IMC,

8 JALAN SULTAN ISMAIL 50250 KUALA LUMPUR,

MALAYSIA

t: +603 2072 4604

e: Cduncan@adc-engineering.com

 

ADC SAUDI ARABIA

IN COLLABORATION WITH GOTECH

P.O.BOX: 402 AL-KHOBAR 31952

t: +966 3 8533443

e: marakzeh@gotech.com.sa

 

ADC INDONESIA

ADC LIBYA

ADC VIETNAM

| PRIVACY POLICY | TERMS OF USE | SERVICES TERMS & CONDITIONS

© ABERDEEN DRILLING CONSULTANTS LTD 2017 ALL RIGHTS RESERVED

ADC UAE

IN COLLABORATION WITH AL MASAOOD OIL & GAS

606 HAMDAN STREET, AL MASAOOD TOWER, 17TH FLOOR (P)

P.O. BOX 4352, ABU DHABI, UAE

t: +971 2 8155990

e: bakri@amoilgas.com